Describe
Flexible and soft resin 3D printing service Soft resin materials can be used to make products that only require softness and elasticity, with good elasticity and a certain tensile strength, but may not be so good at tearing resistance. It hardens as the temperature drops and softens as the temperature rises. Spray painting can be applied.
Printing process
Introduction to material properties
Material Color：Pale yellow
Tolerance：±0.1mm
Temperature Resistance：70℃
Minimum Wall Thickness：0.8mm
| Hot deformation temperature | 70℃ |
| Hardness | 30 |
| Tensile strength (tensile) | 3-4MPa |
| Tensile Todulus | 40-50MPa |
| Extension rate (tensile) | 51% |
| Bending strength | 2-3MPa |
| Bending modulus | 80-100MPa |
| Impact strength | 120-150J/M² |
| Water absorption | 1.50% |
Product display
