Describe
SLA high toughness resin 3D printing is suitable for plastic products with high strength requirements. It is also called class ABS material, whose strength performance is similar to that of ABS material and can be tapped.
Process
Introduction to material properties
Material Color：Peak green Tolerance：±0.1mm
Temperature Resistance：56℃
Minimum Wall Thickness：0.8mm
The surface is relatively smooth, suitable for painting, silk screen, electroplating and other finish post-processes.
Ductile ABS photosensitive resin material is suitable for making parts with fine details, good toughness and high strength, especially for products with snap-snap structure and high requirements on surface force. The strength of this material is close to ABS and PBT, and it also has the smoothness and precision of resin.
Material parameters
| Hot deformation temperature | 56℃ |
| Hardness | 82 |
| Tensile strength (tensile) | 42MPa |
| Tensile strength (fracture) | 32MPa |
| Extension rate (tensile) | 3% |
| Extension rate (fracture) | 9% |
| Elastic modulus | 2370-2650MPa |
| Bending strength | 69MPa |
| Bending modulus | 2470MPa |
| Impact strength | 50J/M² |
| Water absorption | 0.40% |
| Poisson’s ratio | 0.43 |
Product Display
